zouzzz Posté(e) 13 février 2007 Share Posté(e) 13 février 2007 (modifié) Salut, hddhacker 0.81 par The Specialist est laché avec pas mal d'amelioration qui facilite le copié-collé, la restauration... Le téléchargement : - hddhacker 0.81 ou - hddhacker 0.81 La source : Bah ce topic Modifié 14 février 2007 par zouzzz Lien vers le commentaire Partager sur d'autres sites More sharing options...
titus360 Posté(e) 13 février 2007 Share Posté(e) 13 février 2007 Slt, afin de préserver une organisation la plus lisible possible sur le forum, nous allons déplacer votre sujet dans une section plus appropriée. Merci de votre compréhension. Lien vers le commentaire Partager sur d'autres sites More sharing options...
zouzzz Posté(e) 13 février 2007 Auteur Share Posté(e) 13 février 2007 (modifié) Les principales ajouts de fonctions : - hddhackr -d : dumpe des secteurs 16 à 22 de votre hdd officiel 360 et les stock dans un fichier nommé hddss.bin sur votre disquette - hddhackr -f : flashe votre hdd WD Scorpio BEVS avec le fichier hddss.bin de votre disquette, cela crée en même temps un fichier unbo.bin - hddhackr -u : flashe votre hdd WD Scorpio BEVS de firmware modifié avec le fichier unbo.bin de votre disquette pour remmettre votre hdd comme à l'origine. En bref : Ajout d'un dumpeur de secteur (bien pratique) et d'une remise à l'origine. Merci The Specialist Modifié 13 février 2007 par zouzzz Lien vers le commentaire Partager sur d'autres sites More sharing options...
zouzzz Posté(e) 13 février 2007 Auteur Share Posté(e) 13 février 2007 En attendant la release, voici le tuto : http://gueux-forum.net/index.php?s=&sh...st&p=991928 GX-mod forum, le seul forum qui dit comment utiliser une appli avant même sa sortie officielle. Lien vers le commentaire Partager sur d'autres sites More sharing options...
titus360 Posté(e) 13 février 2007 Share Posté(e) 13 février 2007 Re, Merci zouzzz pour le boulot @+ Lien vers le commentaire Partager sur d'autres sites More sharing options...
zouzzz Posté(e) 14 février 2007 Auteur Share Posté(e) 14 février 2007 Aurorisation de The Specialist reçue : Le téléchargement : - hddhacker 0.81 ou - hddhacker 0.81 Lien vers le commentaire Partager sur d'autres sites More sharing options...
zouzzz Posté(e) 14 février 2007 Auteur Share Posté(e) 14 février 2007 Le 0.82B vient à l'instant même de sortir : Le readme : Hddhacker v0.82B by the Specialist.*************************** DISCLAIMER ******************************** This tool has only been tested by me. It worked for me. While great care has been taken, this tool may contain bugs and therefore may seriously harm your HDD. Use at own risk !!! *************************** DISCLAIMER ******************************** What: This tool will allow you to use HDD's that are not 'certified' by Microsoft. This specific tool is written for use with the Western Digital BEVS series only ! How to use: Get yourself a Western Digital SATA BEVS HDD. To use this tool, you need a HDD security sector file ('hddss.bin'). If you don't have one, here's how to create one from a valid xbox 360 HDD: * Dumping the hddss.bin file * Boot to dos from a writeable medium (like a floppy). Connect an *original* xbox 360 HDD to your SATA controller. Make sure it is the only SATA device that is connected. Now run 'hddhackr -d'. This will create a file 'hddss.bin' and it will save it to the path you've started the hddhackr from. * Modding your Western Digital * Now turn off your PC and connect the Western Digital and boot to dos again. Type 'hddhackr -f' from the same path you have saved the hddss.bin file to. This will flash your FW. It will ask if you want to create an undo file. It is advised to do so. This will create an 'undo.bin' file that you need if you want to undo the hack. * Check if it worked * Shut down your pc, reboot again to dos and again type 'hddhackr -f'. It should now tell you that the drive should work in your x360. If so, connect it to your x360 and go to your dashboard/system/memory where you should be able to format the drive. * Restoring your WD to original state * If you don't want to use your modded WD in your x360 anymore and you want to flash it back to its original size, then you can now do so. Boot to dos again and run 'hddhackr -u'. This will use the undo.bin file you created before to restore the drive to its original state. FAQ: Q. Will this tool allow me to connect a 500 gb drive to my x360 ? A. No. The information on sector 16 is signed and can't be changed. You can only use size where you have a valid signature for. In otherwords, if a bigger HDD comes out, you can use that signature. Q. With which HDD's does this work ? A. It should work with *ALL* Western Digital HDD's from the Scorpio BEVS series. Q. Do I need the same size WD HDD as the size on sector 16 states ? A. No. You can use bigger HDD's, but you can't use more than the size stated in sector 16. You can NOT use smaller HDD's than the size on sector 16 states. For example, you can use a 40 GB HDD with a sector 16 from a 20 GB HDD, but not the other way around of course. Q. Can I use the HDD in my PC again ? A. Of course. The tool comes with an 'undo' option, that will restore the original size. For example, you use a 40 gb WD HDD, you used hddss.bin from a valid xbox 20 gb HDD, so the tool will transform your 40 GB HDD into a 20 gb HDD. However, you can restore it to 40 gb anytime you want with the undo option. Q. I have a x360 core version and want to use this hack to buy a cheap HDD. But how do i connect it ? A. If you don't have a premium, you can make the HDD internal. One great tutorial that will show you how to do this: http://forums.xbox-scene.com/index.php?sho...585414&st=0 Q. The tool doesn't detect my HDD ! A. First, make sure you are running it from dos, not from a dos box under windows. Then, try playing with the SATA/RAID settings in your bios. Not all SATA controllers are supported. I use a VIA controller, which works perfectly. However my tool fails to see my Promise controller. Q. Could you do this for my Seagate, Maxtor, Samsung or whatever drive too ? A. Yes, but I don't have plans to do so. The cheapest WD drive (40 gb) ships for about $50 and thus is one of the cheapest. It is a lot of work to convert this tool for usage with other brands and I don't think it is worth the trouble. Q. So how do I get my 80 GB WD HDD working as 80 GB in my x360 ? A. There are 2 options: wait for a release by MS, so you can use that sector 16 (or hope that the rumours that they ARE out there already are true) OR wait for the kernel to be hacked. These are the only 2 options. Q. Where can I donate ? A. Nowhere. Just enjoy Thanks to: Team MODFREAKz for his initial logic board experiments, Loser for his findings on the sector 16 and everybody else at XBH. TS in feb 2007 La source : http://www.xbox-scene.com Le téléchargement : hddhackr-0.82 Lien vers le commentaire Partager sur d'autres sites More sharing options...
Messages recommandés
Créer un compte ou se connecter pour commenter
Vous devez être membre afin de pouvoir déposer un commentaire
Créer un compte
Créez un compte sur notre communauté. C’est facile !
Créer un nouveau compteSe connecter
Vous avez déjà un compte ? Connectez-vous ici.
Connectez-vous maintenant