Mise à Jour Du Xell

[kogami]

Une nouvelle mise à jour du Xell est disponible avec un lot de nouveauté non négligeable

XeLLous v1.0 By Redline99

2010-01-22

Features (compared to mainline Xell):

New network stack, lwip 1.3.0

Uses correct MAC address if proper config blocks are in place

Sets DHCP "hostname" for easy identification in DHCP assignments

Refactored/New ata/atapi/mmc drivers

Updated sfcx driver with hardware detection

Many misc text changes/cleanups

Many misc code tweaks/fixes

Many new http features

Download Full raw nand backup

Download Decrypted Key Vault (if available)

Download Fuses (and DVD Key if available) as a text file

Download RAW Key Vault (equivalent to nandpro -r switch)

Download RAW Config Blocks (equivalent to nandpro -r switch)

Prominent display of CPU and DVD keys

Ability to set dvd key from Key Vault to DVD Drive

(possible use: fix bad key flashes to the original drive)

Advanced Nand Flashing

Uses "slot" technique from usb as introduced by Flash360

Write Flash partition from usb (up to 66 MB)

Write Flash partition from optical media

Write FULL raw nand (up to 528 MB) from optical media

USB (FAT-FAT32):

Place in the root dir of the media.

updslot0.bin - Xell (Address 0x0C0000 max length 0x040000 bytes, no metadata)

updslot1.bin - Rebooter (Address 0x100000 max length 0x140000 bytes, no metadata)

updpatch.bin - Rebooter Patches (Address 0x194000 max length 0x004000 bytes, no metadata)

updflash.bin - Nand Image File (this must include the metadata or aka spare/ecc bytes)

This can be up to 66 MB maximum, this covers the Flash Partition on even 256/512 MB

consoles.

CD-ROM / DVD:

Place in the root dir of the media.

updflash.bin - Nand Image File (this must include the metadata or aka spare/ecc bytes)

Must be the full nand with exceptions for consoles with a built in Memory Unit.

For consoles with built in MU you can write just Flash partition (66 MB) to the nand.

USB Notes:

For best results of getting the usb device detected. Remove the power plug from the console

after running the MS dashboard. Then reinsert the power plus, insert usb device and then

boot into XeLLous.

Reading 66MB (updflash.bin) can take a few minutes, be patient while it loads to ram.

Flash Notes:

updflash.bin must include the key vault and config blocks if you require them. XeLLous

WILL OVERWRITE what is on the nand with what is contained in the updflash.bin

Bad Block handling will be invoked if:

Ran from usb

Only data in the Flash Partition

Is one of the following: updslot0.bin, updslot1.bin, updpatch.bin

Is a updflash.bin AND NO PRE-REMAPPED blocks are detected in the file.

Http Notes:

The HTTPD is very primitive, we are not running Apache or anything so be kind to it

and don't open more than one connection.

In testing FireFox has been determined to have the best user experience. Internet Explorer

does work, but seems to have trouble initiating downloads. Once the download has began

IE seems to work ok.

The "Set DVD Key" should only be used by people who fully understand its use. This

is not a DVD flashing feature and it doesn't fully pair a dvd to the Key Vault. It

simply reads the dvd key from the Key Vault and instructs the dvd drive to store

that key in its firmware. It doesn't not in return store the dvd's OSIG in the

Key Vault and it does not Flash the DVD firmware. You probably don't have a use for it.

TFTP Notes:

Currently hardcoded to "192.168.1.98/tftpboot/xenon"

Order of Operations: (first condition meet excludes all the rest)

USB Media

updslot0.bin

updslot1.bin

updpatch.bin

updflash.bin

xenon.elf

Optical Media

updflash.bin

vmlinux

Network Init

DHCP: Auto Assigned (hostname "XeLLous")

Static: 192.168.1.99

Network TFTP

192.168.1.98/tftpboot/xenon

Network HTTPD

Waits on port 80 of displayed IP Address

Files: (Another set of the same for Cygnos compatibility)

The main difference here is the loading address, various versions have been built

and used at different times for different setups, I've inclused all that I know of.

Rename one of these files to "updslot0.bin"

File Name: Loading Address: Example use:

xell-1f.bin 0x1c000000 original jtag hack, xbr_1, xbr_2

xell-2f.bin 0x1c040000 xbr_3, freeboot .1, freeboot .2

xell-readcd.bin 0x01310000 King Kong exploit

xell-serial.bin 0x01300000 King Kong exploit

xell-xell.bin 0x02310000 Not A Clue. Smiley

Future ?? Who knows when, maybe never, feedback needed/wanted ??:

Faster nand speeds, ie: I can triple download speeds from http

Downloading Encrypted KV and Config Blocks

More Flashing features/bad block handling

More HTTP features/tools

Sata HDD Driver

Full CPU Speed

File System driver layer fat/fatx/iso9960/etc ?

Read some sort of XeLLous.ini file for parameters

Such as: Network config, Order of operations, etc...

Thanks:

To all the gracious people who helped test! These are the ones I can remember:

Cr4zi3, Skorchir, Ocelot13, SpkLeader, Zoneout

Greets:

r0wdy, tiros, MODFREAKz, schtrom, xorloser, tmbinc, seventhson, angerwound, kreet, lantus,

Skorchir, D-BlooD, momdad, skitzo, Cr4zi3, Sonic-Iso, stk50, Yoshihiro, Arakon and Alley.

Team Greets:

XBRebooter, XeDev, Jungle, HyperX, Avalaunch, Xecuter,

MS Interactive Entertainment Business Department

AWESOME WORK & THANKS Smiley

http://www.xboxhacker.org/index.php?topic=13876.0

Modifié 22 janvier 2010 par kogami

[legueux]

Merci pour l'information, l'article a été publié sur le site.