Xflasher360 V0.8

[c0rsica94]

XFlasher360 v0.8

------------------------------

In the past there have been many users who have had problems when it comes to flashing their drive

under Windows (Drive-bricking, Windows freezes, etc.) so I have decided to program a DOS-based tool

that automatically does the following:

- Copying of the DVD-Drive Firmware

- Spoofing/patching of the Firmware

- Flashing the DVD-Drive with iXtreme

The Tool: XFlasher completes the entire Flash-Procedure. For this the original firmware

as well as the the files iXtreme.bin, org.bin, key.bin, identify.bin, inquiry.bin or dummy.bin are

placed in separate folders. Note: Not all of the files mentioned above are created for every drive model.

DVD drives from Lite-On, BenQ, and Samsung/Toshiba are supported. It is not possible to flash Hi-tachi

drives under DOS at the moment, if this should change in the future then newer versions of Xflasher

will most probably be released with the added support.

Essential Hardware

------------------

1) A PC with SATA and COM Ports (a COM port is only necessary for Lite-On 74850C drives).

A PCI-SATA card also does the trick. Boards with VIA or INTEL chipsets are recommended

2) A USB-Boot-Stick with DOS and the content from the XFlasher 360 file

3) iXtreme firmware for Lite-On 74850C (ixLitV1.bin), Lite-On 83850c (ixLitV2.bin), BenQ- (ixBenQ.bin) and

Samsung/Toshiba (ixSam.bin) drives (gets copied to the firmware folder)

4) A RS232 converter for the Lite-On 74850C drive (i.e. 360 Xtractor Tool)

INSTALLATION:

-------------

Warning: This will completely format your USB-drive!!!

1) Open the files "Install and format USB.bat" and select the drive letter of your USB-drive.

All required files will be copied to your USB-drive, this will make it bootable.

2) Boot your PC from the USB-drive.

History:

--------

ver 0.8

- Lite-On Lite-On 83850c support added

- directory structure changed

- added free-dos instead ms-dos

- updated english and german

- removed french support

- using DosFlash v1.8 for flashing

- using Firmtool v1.4 and liteTool 0.2 for spoofing/key-changing

- added support for Floppy-Disk

(now you can copy 1. hacked firmware file on disk)

- firmware filenames can be changed in "settings.ini"

Traduction a venir...

TELECHARGEMENT :

[hide]XFlasher[/hide]

[legueux]

News publiée, la traduction française est présente également.