PSP Radio v0.37 Final


Newserator
 Share

Messages recommandés

Raf met en ligne la dernière version, la 0.37 de sa magnifique application qui vous permet d'écouter des stations de radio en streaming (en lecture) depuis Internet et via le port WIFI de la console.

Application uniquement pour PSP 1.50.

Un très grand nombre de nouveautés et de corrections sont au rendez vous, impossible de toutes les énumérer tellement elles sont nombreuses.

PSPRadio_2.png

download.gif PSP Radio v0.37 Final

homesite.gif Site officiel : http://pspradio.berlios.de/phpBB/viewtopic.php?t=226

Lien vers article original : http://mobiles.gx-mod.com/modules/news/artic...hp?storyid=2103

Lien vers le commentaire
Partager sur d'autres sites

Oui, c'est vraiment lourd..

J'ai aussi un prob avec le eboot loader, je vois pas a quoi sert le wifi loader si il ne va pas...lol

- Can't run kernel-mode applications.

- That means anything that uses wi-fi or USB access, or emulates ISOs/UMDs.

C'est a vérifier car PSP Radio utilise l'USB et ca fonctionne... <_<

Lien vers le commentaire
Partager sur d'autres sites

Ca y est, j'ai trouvé comment le faire marcher sur 2.0...

C'est dans le readme de l'eboot loader et ça fonctionne...!!! :ok::marteau::Pwoot

Using the EBOOT loader to run wifi applications

-----------------------------------------------

Because Wifi applications normally need kernel-mode to operate, you need to use

a special workaround to load them with the EBOOT loader. You need to have

set up a working wifi connection in the usual way before you can use wifi

homebrew - if you can use the v2.0 web browser, then you're set.

- Go to the PHOTO menu on your PSP, open the 'wifibackground.png' file, and

set it as your PSP's wallpaper.

- Completely reboot your PSP, by holding the power button for 10 seconds

until it powers off. Then switch it back on again.

- Go straight to the PHOTO menu, and open the 'Wifi Loader' folder.

- You'll see an image that says 'wifi loader ready', plus another that says

'Corrupted Data'. If your PSP hasn't frozen at this point, then the

wifi loader has been successfully started, as a background process.

- Now exit the PHOTO menu, and go all the way to the left, and then the

bottom, to the 'Network Settings' menu.

- Select this menu to get a choice of 'Ad Hoc' or 'Infrastructure'. Choose

'Infrastructure'.

- Select the connection to use. Note that you won't be able to select a

different connection within the homebrew (any change of connection is

ignored by the EBOOT loader), so highlight the appropriate one now.

- Press Triangle for connection options, and select 'Test Connection'

- The wifi light should come on, and your PSP connects to the network.

- Once the statistics for the connection are shown, the connection is

stable and ready to use. Now press and hold LTrigger+RTrigger+SELECT

for a few seconds. The screen will flicker for a moment, and then the

EBOOT loader menu will start.

- Now the EBOOT loader is ready to use, with full wi-fi support.

Lien vers le commentaire
Partager sur d'autres sites

Créer un compte ou se connecter pour commenter

Vous devez être membre afin de pouvoir déposer un commentaire

Créer un compte

Créez un compte sur notre communauté. C’est facile !

Créer un nouveau compte

Se connecter

Vous avez déjà un compte ? Connectez-vous ici.

Connectez-vous maintenant
 Share