Newserator Posté(e) 3 avril 2019 Share Posté(e) 3 avril 2019 Annoncé quelques jours auparavant, c’est tout nouveau, tout chaud sorti du four (très fertile) du hack sur Nintendo Switch. jakibaki nous offre à l’instant la première version de son module « hid-mitm », dédié aux Custom Firmware, qui vous offre la possibilité de remapper complètement les touches de vos manettes selon votre envie. Le hack fait ainsi un nouveau bond en avant dans la personnalisation, fine, de votre console, pour encore mieux correspondre à vos attentes. Le développeur indique que celui-ci a été développé et testé pour Atmosphère, il ne peut pas garantir son fonctionnement sous ReiNX (seul Custom Firmware qui n’est pas basé sur Atmosphère). Pour configurer le mappage des touches, vous pouvez, au choix, passer par Kosmos Toolbox ou éditer directement le fichier « /modules/hid_mitm/config.ini ». En cadeau « bonux », vous pourrez également utiliser n’importe quelle manette bluetooth sur Switch, grâce à une application pour smartphone qui fait office de passerelle. Même si le matériel nécessaire complique pas mal les choses, on peut saluer l’effort (et espérer un jour pouvoir le faire directement sur Switch, sans périphérique supplémentaire ?). hid-mitm Sysmodule mitming the Horizon hid (human interface device) services. Disclaimer: This sysmodule is in beta! Problems are to be expected. If you encounter any that aren’t listed in the known issues section please report it here if nobody else did already. Features Rebind buttons on your gamepads. Use custom gamepads on your nintendo switch by using your phone/pc as a proxy. Setup While hid-mitm will work perfectly fine on stock atmosphere and possibly reinx the recommended setup is to download the latest Kosmos since it comes preconfigured with the awesome Kosmos Toolbox which allows you to easily configure hid-mitm. On Kosmos it’s just a matter of opening the Kosmos Toolbox, enabling the hid-mitm sysmodule and rebooting. On Atmosphere, installing hid-mitm can be done by dragging the content of the release. No help for ReiNX is provided, if it runs that’s fine but if you run into problems please try on a supported cfw before reporting. No support whatsoever for sxos. Usage Rebinding buttons Simply open the Kosmos toolbox, go to the sysmodule menu and continue to the hid-mitm menu from there (it’s a simple button-press explained in the bottom bar) After that a screen will pop up in which you can select the button you want to rebind and then what you want it to rebind for. After you’re done, be sure to touch the button in the middle to save your changes. You can also configure it manually by editing the /modules/hid_mitm/config.ini file. Custom gamepads The way that custom gamepads work with hid-mitm is not by directly connecting the gamepad to your switch but by connecting your gamepad to your phone (and experimentally pc) and then running the hid-mitm app which then in turn sends the input to your switch which will recognize it as an additional pro-controller. Download the companion_apps.zip from the release page. Android Install the hid-mitm.apk from the zip on your phone. Make sure that your switch has hid-mitm enabled and is connected to the same network as your phone. You can use 90dns if you don’t want your switch to connect to nintendos servers. Connect your gamepad to your phone Enter the ip-address of your nintendo switch in the hid-mitm app (it can be found in the network settings) and press « connect » Your switch now should now pick up your gamepad as an additional pro-controller! Lien vers le commentaire Partager sur d'autres sites More sharing options...
Messages recommandés
Créer un compte ou se connecter pour commenter
Vous devez être membre afin de pouvoir déposer un commentaire
Créer un compte
Créez un compte sur notre communauté. C’est facile !
Créer un nouveau compteSe connecter
Vous avez déjà un compte ? Connectez-vous ici.
Connectez-vous maintenant