[résolu] Installation Bootmii + Preloader

[Saloucious]

Bonjour,

je voudrais installer bootmii et le preloader 0.30 sur ma wii qui est en firmware 3.4E.

De plus ma wii est pucée et j'avais installé l'homebrew channel il y a quelques temps (v 1.0.1).

J'ai un peu du mal à comprendre la marche à suivre.

Dans un premier temps, est ce que je dois downgrader vers un firmware 3.2 (cf. tuto) ou utiliser pimp my wii ?

Si je dois downgrader, n'est il pas préférable d'avoir un preloader installé pour ce genre d'opérations ?

Merci d'avance.

Modifié 6 janvier 2010 par Saloucious

[Shakin]

Salut,

Pas besoin de downgrader.

Pose toi plutôt ces questions avant : Ai-je vraiment besoin du Preloader ? Puis-je installer Bootmii en Boot2 ?

@+

[Saloucious]

Ok je viens d'installer bootmii en boot2.

J'ai le fichier install.log suivant par contre quand je reset ma wii, il semble que rien ne soit détecté ....

Une idée ?

HackMii v0.6 installer starting upPVR = 00087200running under IOS 36 rev 0xc1253 titles are installedFound IOS 38: revision: 0xe19.Found IOS 55: revision: 0x1219.Found IOS 53: revision: 0x1011.Found IOS 37: revision: 0xe19.Found IOS 10: revision: 0x300.Found IOS 50: revision: 0x1319.Found IOS 36: revision: 0xc12.Found IOS 35: revision: 0xc10.Found IOS 34: revision: 0xc0f.Found IOS 33: revision: 0xb10.Found IOS 31: revision: 0xc10.Found IOS 30: revision: 0xb00.Found IOS 28: revision: 0x50c.Found IOS 22: revision: 0x309.Found IOS 20: revision: 0x100.Found IOS 17: revision: 0x205.Found IOS 15: revision: 0x109.Found IOS 14: revision: 0x106.Found IOS 13: revision: 0xf.Found IOS 12: revision: 0xb.Found IOS 11: revision: 0x100.Found IOS 21: revision: 0x20a.Found IOS 2: revision: 0x182.Found IOS 9: revision: 0x208.Found IOS 4: revision: 0xff00.IOS versions: Installer: 34, HBC: 36, DVDX: 36launching IOS for the installer...starting preparationsCalling boot2_run(1, 34)Waiting for boot2 to load ...boot2 loaded, waiting for IOSIOS loaded: IOS34 v12.15IPC started (0)parsing last generation bootmapfound valid boot2 blockmap at block 1 (pos 0x627c0), submap 0, generation 2found valid boot2 blockmap at block 5 (pos 0xe67c0), submap 0, generation 3parse_blocks: found 2 valid blockmapsfound 2 valid blockmapsusing generation 3boot2 blocks: 00 01 02 03 04 05 06boot2bin @5,0 (blocks=0,1 - bootmii=0)bootmii@-1,-1boot2 blocks: 06 05 04 03 02 01 00boot2bin @5,1 (blocks=6,5 - bootmii=0)boot2 block layout: 2 2 1 1 1 0 0Assembling boot2 in RAMcopyright size = 34copyright text = 'Copyright 2008,2009 Team Twiizers.'tmd ends at 0x80295dac, data starts at 0x80295de0bootmii version  = '1.1'Ok for boot2 installpreparations done![33;1mThe test results are in:[37;1m  Using IOS versions:	  Installer: 34, HBC: 36, DVDX: 36  The Homebrew Channel:	[32;1mCan be installed[37;1m  DVDX:					[32;1mCan be installed[37;1m  BootMii:				 [32;1mCan be installed[37;1mA BootMii install [33;1mrequires a SD card[37;1m.Runtime files will be written, these are required toproperly boot BootMii.Mounting SD card...Creating directory '/bootmii'...Writing '/bootmii/armboot.bin'...Writing '/bootmii/ppcboot.elf'...Writing config file...Done.Testing usable NAND blocks...testing block 3writing test patternverifying test patternErasing test patterntesting block 4writing test patternverifying test patternErasing test patterntesting block 5writing test patternverifying test patternErasing test patternCalling boot2_run(1, 34)Waiting for boot2 to load ...boot2 loaded, waiting for IOSIOS loaded: IOS34 v12.15IPC started (0)Erasing NAND block 3Writing NAND block 3Verifying NAND block 3 to block 0 of BootMiiErasing NAND block 4Writing NAND block 4Verifying NAND block 4 to block 1 of BootMiiCalling boot2_run(1, 34)Waiting for boot2 to load ...boot2 loaded, waiting for IOSIOS loaded: IOS34 v12.15IPC started (0)

[Saloucious]

Bon j'ai reformaté ma sd en fat32, remis les fichiers et ca semble fonctionner