robert Posté(e) le 11 février 2006 Posté(e) le 11 février 2006 bonjour a tous je voudrais savoir comment active t'on la fonction "acer-to-disc recovery" dans un bios phoenix ( avec un PC acer ) ? merci d'avance tchao
Chuck.hc Posté(e) le 11 février 2006 Posté(e) le 11 février 2006 salut apparament avec une disquette : Recovery Boot Disk Acer Recovery CDSystem Doesn't Correctly Bootup The Aspire CPR set is a CD ROM and boot diskette designed to restore all the preloaded software as delivered directly from the factory. This very important tool can be used by you if you have software problems and takes about 30 minutes to complete. The first release of the Aspire CPR set Version 1.0, was designed to be used on the Acer quad speed CD only which was available on sale in February and early March 1996 in the United Kingdom. However in improving the performance of the Aspire system, Six Speed CD ROM's were introduced in April 1996. Following the introduction of the Acer six speed CD ROM a new Aspire CPR boot floppy is required to correctly perform the CPR operation. If you have used the first version of the Aspire CPR boot diskette and you have a six speed CD ROM then you could have problems with the integrity of software once windows 95 has reloaded. There is a fix available for this problem, please contact your original supplier. Not Booting Into Windows 95 On some of the earlier Acer recovery sets, the floppy's AUTOEXEC.BAT was designed to inflate the CD's data straight onto the HDD, with no FDISK or FORMAT option. Therefore, if you think you need to FDISK or FORMAT, press F8 when it says "Starting Windows 95", and choose "Safe Mode Command Prompt Only".When you get to the A:\ prompt, you will need to change to the WIN95 directory (CD\WIN95), and the FDISK and FORMAT commands are in there. Not Seeing CD-ROM If when using the Acer recovery CD you may find that after the machine has been formatted it brings up the message 'CD-ROM not found'. Go into the BIOS (CTRL+ALT+ESC) choose BIOS Setup utility, go to fixed disk 2 and set to CD-ROM, you should find that it can now be seen and load it all in.
Messages recommandés
Créer un compte ou se connecter pour commenter
Vous devez être membre afin de pouvoir déposer un commentaire
Créer un compte
Créez un compte sur notre communauté. C’est facile !
Créer un nouveau compteSe connecter
Vous avez déjà un compte ? Connectez-vous ici.
Connectez-vous maintenant