Peut T-on Changer De Dd Avec Ce Hack ?

[agonistes]

Bonjour à tous,

Je lisais le tuto "installer un dd" et je

fus pris d'un terrible doute (euh ?)

puisque la xbox n'est pas pucée je ne peux

pas booter avec le cd d'install d'evoX.

Donc peut t-on changer son dd avec le

hack free-x ?

merci d'avance.

[aliasr]

Oui tu peux installer un nouveau disque dur avec Phoenix mais il faudra le

locker avec Config Magic ... Perso je viens de le faire et ça marche mais ça à pas été facile

!

Par contre si tu as pas de puce je pense qu'il faudra le faire sur le pc par

le soft Unlock ... y'a aussi des tutos la dessus donc fais une petite recherche

[Invité Loverboy]

En fait tu prépare le dd sur le pc puis tu met les fichier de bacup de ton dd

original (que tu ora uploader avan ) et tu le met ds ta x normalemen il

devré boot sur phoenix logikemen? De la tu le lock

[foufurieux]

qq'un pourrait il décrire la manip globalement, pour

changer son disque sans puce???

paske pour le locker, il faut une clef, non??

[Invité Sarf]

Désoler je ne l'ai pas traduit...

De toute façon j'ai pas

encore le temp de la tester alors ....

Je vais editer mon post si j'ai le temp de

traduire et

tester

Sarf

REF:http://forums.xbox-scene.com/index.php?act=ST&f=45&t

=76808

This is basically a modified version of what heathkit did (thanks a million for

the xlinux dd thing, that was my only problem to solve in my quest)..

BUT I didn't

want to use a SAMBA share or bother installing config magic.

Needed:

1.0 Xbox

(or so mine was)

New HDD *lockable*

TEMP HDD (FAT32, can be a couple

gigs)

evox installed and working

HDD driver

hdprepar (yes, that's the

spelling)

liveinfo

dos boot disk with unlockx

xlinux boot CD

some basic

knowledge....

READ THIS OVER FULLY BEFORE YOU START (twice

even!), you may be able to merge some steps together if your more comfortable than the

level I wrote this for.

Assuming you already have Bert N Ernie or something loaded...

*see other guides*

1. Run the Backup option in the evox menu of your xbox

2.

FTP in and download the c:backup folder somewhere safe

3. Boot DOS

floppy

4. Use unlockx to unlock your HDD with the key from the "backup" information

from evox. (unlock it twice in a row)

5. Reboot in windows and run HDD Driver (even if

it fails, just use the utility to backup your HDD, just in case!)

6. Reboot in

windows with the new xbox HDD drive you want to use connected

7. Run hdprepar

and DO your NEW drive (just zero first 4096)

8. Run liveinfo and use your .bin from the

evox backup and select the NEW HDD and get the _new_ hard drive key... write it

down/print it, you'll need it

9. Reboot off xlinux CD-ROM with original xbox as

Primary Master or CS is fine (so i'll assume its hda) and your TEMPHDD as Secondary

Master (so i'll assume it's hdc) and make the CD-ROM Secondary

Slave.

10. Once in xlinux, if you go to /dev you should see hda50 hda51 hda52... and

hdc# say hdc1

11. now in console type

mkdir /mnt/temp

mount /dev/hdc1

/mnt/temp

dd if=/dev/hda51 of=/mnt/temp/xboxc.img (makes image file on temp

HDD)

this should give you a message about blocks in and out (complete)

11a.

Now Reboot with the NEW Xbox HDD as CS (should become primary master). again in

console type

mkdir /mnt/temp

mount /dev/hdc1 /mnt/temp

dd

if=/mnt/temp/xboxc.img of=/dev/hda51 (writes image to new HDD xbox's C)

this

should give you a message about blocks in and out (complete)

now we can check it

out!

mkdir /mnt/newxboxc

mount -t fatx /dev/hda51 /mnt/newxboxc (now you

can ls it and see if it's okay)

lets copy that xboxc image FILE to our new xboxc, for

FTP later as backup.

cp /mnt/temp/xboxc.img /mnt/newxboxc/

should be all done

now

12. Reboot with DOS floppy and NEW HDD connected (only) and have

jumpered as the same as it was on the original xbox HDD (mine was cable select), make sure

it's on the PRIMARY CHANNEL.

13. Run unlockx and select the new HDD and

lock it with the NEW HDD KEY you got from liveinfo.

14. Reboot and check that

it's locked in unlockx

15. Install into xbox and boot it up! (should work like

old drive)

16. FTP in and download xboxc.img to your computer

17. configure

evox to format your F, X, Y and Z drives (NOT C or likely E) *see other guides*

18.

Reboot computer with original xbox HDD and run unlockx and enter the ORIGINAL HDD key

to lock it

19. Reboot and check that locking went ok

20. Put original xbox

HDD in static bag and enjoy the larger one you just installed

I know you can

eliminate some reboots and whatnot by having more drives connceted, but I just left it as is

(little less likely to mess your drives up by say hdprepar'ing the wrong

drive).

BTW, I am at working typing this... I did the swap late last night so I am going

by a fading memory . I'll edit this post as I can since I know it's not written very

professionally at all.

Enjoy

P.S. Don't blame me if you mess your xbox up,

thanks.