-Zou- Posté(e) le 1 janvier 2010 Posté(e) le 1 janvier 2010 (modifié) Une nouvelle version "patch" de XBReboot est disponible pour toutes les carte mère 16Mo résolvant les problème de gel/ralentissement ainsi que la nécessité de patcher les fichiers XEX (media check, etc...) XBReboot est une image à flasher sur la NAND embarquée et ainsi permettre de "rebooter" une 360 JTAG-able (fabriquée avant mi-juin ET ayant un kernel strictement inférieur à 8xxx ) dans un kernel 8955 patché qui vous permettra de lancer des homebrew (XEX non signé). Readme/Nfo: * Who wrote this?* Qui a écrit ceci? De talentueux membres de XBH ont contribué de différentes manières. Vous savez qui ils sont. TeamXBR a assemblé les morceaux, codé les utilitaires et les a collé ensemble pour que ça fonctionne. * Comment ça fonctionne? XBR et Freeboot utilisent tous deux un "moteur de patch" pour appliquer des patch au bootloaders lorsque la console redémarre. Pour Freeboot, il s'agit de "freeboot.bin" ou "freeboot-manual.bin"; Pour XBR, c'est "xbrfw.bin". Tous deux sont basés sur un code de démarrage de type Xell et sont lancé par l'exploit. Le code applique ensuite les patch se trouvant au block 0x65+ et re-démarre le système. * Quest-ce qui n'allait pas? Les précédentes version de XBR utilisaient le même couple CB/CD pour lancer le kernel 8955 exploité. Freeboot étant une configuration dual NAND, il utilisait le vieux bootloader pour lancer l'exploit ensuite il utilisait le nouveau bootloader, de la seconde NAND, pour lancer le kernel. The problems were not related to the patches used by XBR, but rather the use of the older bootloaders. Please try to control yourselves if problems arise, they can always be fixed. Dont do anything crazy like start conspiracy theories, buy a cygnos, wire up a dual nand or xd card, rip out a big nand to swap in a smaller one etc, etc. Have a little patience, have a little faith * So whats the fix? 1) Add a copy of the new bootloaders to flash. 2) Create patches to use the newer relocated bootloaders on reboot. It was easier to re-use the freeboot.bin patch engine to accomplish this task. The freeboot patches themselves are not used. XBR continues to use its own patches, however, the freeboot.bin patch engine will be used to apply them. This also allows custom patches to be applied, in the format used by freeboot. XENON_8955_3: - Uses 6750 as the alternate CB to allow easy support for all hardware versions. - No changes made to patches, exact same functionality as 8955_2. XENON_8955_2: - Add a copy of the new bootloaders to flash. - Create patches to use the new relocated bootloaders on reboot. - Translated existing XBR patches to use the freeboot.bin patch engine. - Fixed build file to use CB/CD 1921 for all xenon. - Eliminate media binding path checks, run xex from all media without patching. * XBReboot Block Layout: Ox00 - 0x2F Xell Boot firmware 0x30 - 0x3F Backup Xell 0x40 - 0x4F freeboot.bin or freeboot-manual.bin (patch engine core) 0x50 - 0x61 Alternate CG 0x62 - 0x64 Spare blocks 0x65 - 0x65 Patch.bin, patches for bootloaders and kernel 0x66 - 0x8F Alternate CB/CD/CE 0x90 - 0x?? Flash file system * HowTo: 1) Extract KV and Config blocks from orig.bin nandpro orig.bin: -r16 rawkv.bin 1 1 nandpro orig.bin: -r16 rawconfig.bin 3de 2 2) Inject those blocks into XBR.bin nandpro XBR.bin: -w16 rawkv.bin 1 1 nandpro XBR.bin: -w16 rawconfig.bin 3de 2 3) Flash result nandpro lpt: -w16 XBR.bin * Notes: There is no need to unpack and repack pirs files! This is a limitation of freeboot. Not XBR. Aside from that major difference, all functionality is the same. Individual sections can be updated or extracted seperately using nandpro. Source : Xbox-Scene.com Rem : Traduction en cour du ReadMe. Modifié le 1 janvier 2010 par -Zou-
legueux Posté(e) le 1 janvier 2010 Posté(e) le 1 janvier 2010 Merci pour l'information, l'article a été publié sur le site.
Messages recommandés