bitonio6 Posté(e) le 15 juillet 2009 Posté(e) le 15 juillet 2009 Hello à tous... Est-ce qu'il faut faire quelque chose des informations qui sont indiqués sur les "autocollants" collés sous les wiikey 2? Ce genre d'information: 5000 2034 7368-6 YYj!e2sVH5xxERFF Parce que si elles doivent servir un jour, ces infos, ce serait bien de les coller ailleurs que sous la puce! Ce serait bien, le gars fait une mise à jour et on lui demande "veuillez rentrer votre n° de série de votre wiikey 2" Faut ouvrir la console, déssouder la puce et la retourner, ça serait vraiment cool!
xam1311 Posté(e) le 15 juillet 2009 Posté(e) le 15 juillet 2009 toi tu a jamais lancé de cd de mise à jour ou config wiikey 2 , voir même lu le tuto/test wiikey 2 ++
jp33 Posté(e) le 15 juillet 2009 Posté(e) le 15 juillet 2009 (modifié) Non, il ne sait faire que des suppositions .... De plus, je le soupçonne de ne pas savoir lire sur un écran, que ce soit de son ordinateur ou de la télé une fois que le fameux CD de configuration a été lancé .... Modifié le 15 juillet 2009 par jp33
bitonio6 Posté(e) le 16 juillet 2009 Auteur Posté(e) le 16 juillet 2009 En regardant sur le site wiikey.cn on ne trouve rien de spécifique... Le plan de montage en image et en pdf et sinon 2 fichiers TXT dans les deux images disque que l'on peut télécharger et qui disent: =======================================================Wiikey 2 Rescue Disc v1.2 - 'Asgard Core' - ALL REGIONS ======================================================= This software is provided as-is, with no warranties of any kind. If you use this software, you do so at your own risk! For the latest version, see http://www.wiikey.cn Thank you for supporting Wiikey! ========= IMPORTANT ========= 1. This firmware is for use with all Wiikey 2 chips. For Wiikey legacy (v1) chip updates and config discs, please see http://www.wiikey.cn/legacy/ 2. Please note that although v1.2 fixes a bug which was causing issues if the first game disc inserted was a Game Cube one, you should still be 100% sure that the first game you insert into the Wii after installation is an own-region original Wii game disc. This is necessary to ensure that the correct region is properly set. 3. Be sure to check that the md5 has of the archive you downloaded matches the one posted on the www.wiikey.cn website prior to using this software! =============== Version History =============== * v1.2 - Fixed bug with update blocker to enable the ability for own region updates to be allowed (default) or blocked using the config disc - Fixed bug which stopped automatic region detection from working properly if the first game inserted after installation was GC. * v1.1 - Added update blocker * v1.0 - Initial release ============ Instructions ============ Burn the .iso to a blank DVD and boot. The Wii will then appear to 'freeze' and you will not be able to eject the disc for about 1 minute. As soon as you are able to eject the disc, reboot your Wii and the update will be enabled. After this, you will be able to run the Config disc (downloadable from wiikey.cn to configure the new Update Blocker feature. Unfortunately, Korean consoles cannot run GC discs, which means that no config disc is available. However, the default setting of the Update Blocker feature is to block other region updates and to only to allow own region updates. Enjoy :-) ===============================================================Wiikey 2 Update / Config Disc v1.2 - 'Asgard Core' - PAL REGION =============================================================== This software is provided as-is, with no warranties of any kind. If you use this software, you do so at your own risk! For the latest version, see http://www.wiikey.cn Thank you for supporting Wiikey! ========= IMPORTANT ========= 1. This firmware is for use with all Wiikey 2 chips. For Wiikey legacy (v1) chip updates and config discs, please see http://www.wiikey.cn/legacy/ 2. Please note that although v1.2 fixes a bug which was causing issues if the first game disc inserted was a Game Cube one, you should still be 100% sure that the first game you insert into the Wii after installation is an own-region original Wii game disc. This is necessary to ensure that the correct region is properly set. 3. Be sure to check that the md5 has of the archive you downloaded matches the one posted on the www.wiikey.cn website prior to using this software! =============== Version History =============== * v1.2 - Fixed bug with update blocker to enable the ability for own region updates to be allowed (default) or blocked using the config disc - Fixed bug which stopped automatic region detection from working properly if the first game inserted after installation was GC. * v1.1 - Added update blocker * v1.0 - Initial release ============ Instructions ============ Burn the .iso to a blank DVD and boot. If the Wiikey 2 does not already have the latest firmware, you will be prompted to update it. You must update the Wiikey 2 before you can use this config disc. Enjoy :-) Donc, en s'informant, on a aucune info de plus que ça!
xam1311 Posté(e) le 16 juillet 2009 Posté(e) le 16 juillet 2009 ahem que dire de plus ? le but du sujet c'est quoi ? ++
mouflo Posté(e) le 16 juillet 2009 Posté(e) le 16 juillet 2009 LOL , tu doit vraiment t'ennuyer un max dans la vie. Le roi du sujet sans intérêt vivement les prochains du style : - c'est Nintendo qui crée les puces dans l'ombre, la preuve y a la place exprès au milieu du lecteur pour en mettre ! - pourquoi mettre des led sur une puce alors qu'on les voit pas quand la Wii marche. J' admire ta persévérance, tu doit avoir des oeilleres pour pas voir a quel point tu fait rire les gens avec tes sujets
Shakin Posté(e) le 16 juillet 2009 Posté(e) le 16 juillet 2009 Salut, Je vois ce qu'il a voulu faire. Ce n'est pas bete lorque l'on ne connait pas la chose, mais lorsqu'on la connait on comprend de suite que ça ne sert à rien. bitonio6 merci pour l'idée mais ça ne sert à rien. Je lock ton topic sinon ça va se transformer en un topic de merde. @+
Messages recommandés