Impossible De Graver

[plexi]

Bonjour a tous.

J'ai un problème au niveau de la gravure de mes jeux de xbox (provenant de mes originaux)

Même en suivant le tuto posté sur le forum... ===> http://tutoriaux.gueux-forum.net/index.php..._GRAVURE_BACKUP

...la tentative de gravure se relance jusqu'à 20 fois avant d'afficher l'erreur :

Les disques que j'utilises sont des Verbatim DVD+R DL et mon graveur est un BenQ DW1625 Light scribe

Voilà les infos d'img Burn :

BENQ DVD DD DW1625 BBGA (ATA)

Current Profile: DVD+R DL

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 4 173 824

Free Space: 8 547 991 552 bytes

Free Time: 927:32:74 (MM:SS:FF)

Supported Write Speeds: 2,4x

DVD±R DL Boundary Information:

L0 Data Zone Capacity: 2 086 912

Changeable: Yes

Physical Format Information (ADIP):

Disc ID: MKM-003-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196 608

Last Physical Sector of Data Area: 16 580 607

Last Physical Sector in Layer 0: 2 283 519

Physical Format Information (Last Recorded):

Disc ID: MKM-003-00

Book Type: DVD+R DL

Part Version: 1

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 2

Track Path: Opposite Track Path (OTP)

Linear Density: 0.293 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196 608

Last Physical Sector of Data Area: 16 580 607

Last Physical Sector in Layer 0: 2 283 520

Et voici le log :

I 16:54:50 Destination Device: [0:1:0] BENQ DVD DD DW1625 BBGA (D:) (ATA)

I 16:54:50 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x)

I 16:54:50 Destination Media Sectors: 4 173 824

I 16:54:50 Write Mode: DVD

I 16:54:50 Write Type: DAO

I 16:54:50 Write Speed: 2,4x

I 16:54:50 Link Size: Auto

I 16:54:50 Test Mode: No

I 16:54:50 OPC: No

I 16:54:50 BURN-Proof: Enabled

I 16:54:50 Book Type Setting: DVD-ROM

I 16:54:50 Advanced Settings - WOPC: Yes

I 16:54:51 Optimal L0 Data Zone Capacity: 1 913 760

I 16:54:51 Optimal L0 Data Zone Method: Copied From Original Disc

I 16:54:51 Filling Buffer... (40 MB)

I 16:54:51 Writing LeadIn...

W 16:54:53 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Is Full

W 16:54:53 Retrying (1 of 20)...

W 16:54:55 Retry Failed - Reason: Power Calibration Area Is Full

W 16:54:55 Retrying (2 of 20)...

W 16:54:58 Retry Failed - Reason: Power Calibration Area Is Full

W 16:54:58 Retrying (3 of 20)...

Heureusement que la gravure ne commence pas complètement à chaque fois car cela aurait fait pleins de disques foutus :s

Merci de votre aide et bonnes vacances à ceux qui le sont

[sebker56]

http://www.googleesttonami.net/?q=Power+Ca...on+Area+Is+Full

allez,au boulot...