Xbox 360 Halo 3 Edition = Processeur 65nm?

[DChercule]

Salut,

Alors, a votre avis, info ou intox?

http://www.maxconsole.net/?mode=news&newsid=21269

Confirmed: 65nm CPU and GPU now in Halo 3 edition Xbox 360's

News has come to light that some of the Halo 3 limited edition Xbox 360 consoles incorporate the 65nm CPU and GPU, which in essence make the console more reliable and less power hungry than the normal 90nm boxes which are to be found in every other Xbox 360 console released to date. We were all unsure when the 65nm consoles would hit, but it took us all by surprise that they have indeed debuted in the Halo 3 machines and not the Elite. However, finding out if you have the 65nm console isn't easy, as you need to take your console apart.

First of all, thank you JWSpeed for doing all of your testing and pulling your Halo 3 console apart. Also, thank you for the great pictures!

Now for the good stuff...

How to see if you have a 65nm (Falcon) console:

First, get a flashlight that is very bright. Then put your console upside down (HD side down). You should be looking at an black or grey piece of plastic which is the bottom vent. Shine the flashlight directly into the bottom of the console (it works best to sit the flashlight on the plastic).

Then move the flashlight to the right side of the plastic. When you look inside of the console directly below the light, you will see a large white piece of plastic. This is the airflow shroud. You can see this highlighted in this picture: http://i181.photobucket.com/albums/x127/MRCUR/S8000516-2.jpg

Next, move the flashlight to the left a bit and look into the console again. You are looking for the large silver square that is directly in front of the airflow shroud. This piece will tell you whether or not you have a 65nm console.

90nm CPU Heatsink: http://i181.photobucket.com/albums/x127/MR...8000516-2-1.jpg

65nm CPU Heatsink: http://i181.photobucket.com/albums/x127/MR...heatsink4-2.jpg

(Notice that there is no heatpipe on the new 65nm CPU heatsink.)

Modifié le 28 septembre 2007 par DChercule

[CodeLestat7]

elle est plus belle qu'en photo! c'est la seule chose que je dirais de sûr;)

sinon pour avoir testé une en mag, je n'ai aps sentie de diff avec une élite.

et à moins de démonter...

à une semaine près, je repartais avec celle ci!

donc dommage, mais super content d'un DD qui permet d'avoir réellemnt les démos sans effacer à tout bout de champs.

la manette est aussi sympa la élite, et en noir les sticks rendent bien( si quelcun sait si on peut avoir ces manettes au couleur de la console merci:) pas les mochetés des manettes , qui sont sauvées par les figurines de todd mac farlane;)

Modifié le 28 septembre 2007 par CodeLestat7