Qoob V1.1


FOAD
 Share

Messages recommandés

Lo,

ca sera juste un update, quand j'ai testé la puce les fonctions proposés n'etaient pas celle promises sur le papier mais la puce etait enocre en dev.....maintenant elles sont belles et bien presentes et fonctionnelles.....et la puce est disponible a la vente !!

Je devrais proposé bientot un test de la SX aussi... ^_^

++

              - qoob BIOS v1.1 -

                21th of april, 2005

This is the v1.1 final.

FEATURES:

- Direct boot of all media (including DVD+R),

without swapping!

- Fastboot of both original and backups

(this time with autodetection for original games)

- Disc swap support!

- Less DREs than older BIOS!

- Disc browser for ISO9660-DVDs, supporting

Joliet for running homebrew .ELF/.DOL files

- Disc check feature

- All the usual stuff

- Network support, look below!

We tried a small DRE work around, but this of course doesn't

fix your media. If you have DRE problems, please try checking

the disc with the integrated disc check (hold 'A'). If you

get errors here, you *have* a media problem. We try working

around this, but this won't fix the root of the problem.

--------------| A small statement to the Cobra-Team:

Fine, now we got to some point. You ripped our stuff (audio-

fix for certain), and we feel fine about that. Protections

are there to be broken, though we made it a bit easy this time.

Expect some improvements when we have new valueable stuff.

(We made the "read offset" compatible to cobra 1.0, in case

some software requires this.)

That said.

The new windows software has support for directly flashing ELF

and DOL files. The next paragraph shouldn't be required anymore,

but for the people interested:

--------------| Some small technical information:

All flashed "blocks" have a 0x100 bytes header which looks like:

00....03 ID (either "© " for a .GCB file or "ELF\0"

            and ELF, more (like DOL and BIN) to come soon)

04....f7 description, will be shown in boot menu

f8....fb reserved

fc....ff size (in bytes), must be multiple of 64k

If you have flashed an elf file, it should appear in the boot menu,

so you can run it.

--------------| About the network support:

IP address is currently hardcoded to 192.168.1.32. This should fit

most people. (Hint: Even Windows supports more than one IP address

per network adapter. No need to break your network.)

We will make this configurable in the next version, don't worry.

Network support comes from tmbinc's fine IPL replacement (thanks,

man!). We removed GPL'd parts before (especially the gc-linux based

network driver) and replaced them with own. LWIP's license is

BSD-styled and tmbinc's stuff is public domain, as he stated. We

hope it's ok, but we would had done it in a very similiar way, so

we better used the time to improve it than to reinvent the wheel.

This only applies to the network stuff. Everything else was

completely recoded by our team.

Supported stuff is:

- DOLUP (upload dol/elf on port 4000 - no bin yet)

- HTTP ("/DVD" for ripping discs)

--------------| About the game disc swap support:

This support won't be 100%, but it should work for most of the

unplayable games.

The lid switch will be autodetected - if you leave the lid open

while booting, it's ok - you won't be able to swap discs then.

If you have the lid closed, you can open it while playing and swap

the disc.

When closing the lid again, it takes some seconds until the drive

continue reading again. It will take ~20 seconds or so. Don't worry.

We try to fix this for sure, but we think it's ok.

--------------| About the audio fix

this bios has - since ever - an integrated audio fix. Some people

have messed up their backups with "fixing" the data so it works

with older bios which don't fix the audio streaming. We feel a bit

sorry for these people, so in this release you can press 'START'

while booting to disable the builtin audiofix.

Please, people, don't mess with your GCMs! Most things will only

make things worse, not better.

++

Lien vers le commentaire
Partager sur d'autres sites

Créer un compte ou se connecter pour commenter

Vous devez être membre afin de pouvoir déposer un commentaire

Créer un compte

Créez un compte sur notre communauté. C’est facile !

Créer un nouveau compte

Se connecter

Vous avez déjà un compte ? Connectez-vous ici.

Connectez-vous maintenant
 Share