Newserator Posté(e) 22 janvier 2014 Share Posté(e) 22 janvier 2014 La team Cobra sort une nouvelle mise à jour pour son ODDE avec comme principale nouveauté le support des jeux Ps1, Ps2 (seulement sur consoles rétro-compatible) et des films DVD et Blu-ray. Cette mise à jour apporte en plus la possibilité de changer de disque-dur console allumé. genps3iso est aussi mit à jour avec le support des fichiers IRD en version 9. Il sort ainsi que GenPS3Extra en version Linux. Le Manager est aussi updaté pour le support de ces nouveautés. La base de donnée s’agrandit aussi et contient maintenant 1342 jeux. La team en profite pour rassurer les personnes avec les nouvelles Board versions 4.20 et 4.30 et les consoles 2xxx. Elle travaille dur pour régler les problèmes, si le lecteur ne répond pas, utiliser le bouton éjecte pour allumer la console au lieu du bouton power. Pour rappel, depuis le mois de décembre, un nouveau modèle QSV est spécialement conçu pour les modèles 2k5, 3k et 4k/4k2, mais ne supporte pas les Phat PATA/SATA ou les Slims 2k/2k1. Le câble USB du pack Full n'est plus inclut, ainsi que les nappes Phat et les câbles FFC 2k/2k1 additionnels. Il y a maintenant deux packages, l'ancien supportant toutes les révisions (excluant les lecteurs BMD-21) et le pack Cobra ODE QSV. Cobra ODDE Firmware Cobra Manager Cobra GenPS3iso GenPS3Extra Pack API Cobra ODDE Site officiel : cobra-ode.com Lien vers article original : http://ps3.gx-mod.com/modules/news/article.php?storyid=3310 Lien vers le commentaire Partager sur d'autres sites More sharing options...
deaphroat Posté(e) 1 mars 2014 Share Posté(e) 1 mars 2014 Bonjour- Sortie du firmware 2.00 avec le support du firmware 4.55 pour les 4K (avec un gros fichier de 250Mo a télécharger)Donc comme la team E3, voir plus dur , graveur blu ray + fil à souder, jeux simple couche, refaire tous ses isoCobra ODE News - UpdateCOBRA ODE 2.0 fw Release for V3 and V4/V4 QSV Cobra PCB's including OFW 4.55 BypassWe are pleased to present for release the Cobra fw 2.0 which has many new features and also initial support for OFW 4.55. Whilst the support for OFW 4.55 is not as convenient as on previous OFW's, it provides a solution for those who accidentally updated or wish to use 4.55 directly on SEN. We suggest that users remain on 4.53 or lower if they wish to benefit from the full convenience of an ODE solution. That being said we are researching other possible methods for compatibility with the 4.55+ firmwares and will keep our users posted through the news on this site and various other forums.Before using the Cobra ODE kindly refer to the 4.55 Bypass manual carefully. Please be sure to follow the prerequisite steps and ensure that you have updated the firmware on the ODE hardware properly first. Kindly note that 1 wire must be soldered to the drive door, which is detailed in the updated installation manual. The newly launched V5 QSV Cobra does not require a wire to be soldered for controlling the 4k series drive door, since it is bundled with a special adapter which takes care of this functionality via the included ribbon cables.In addition to the 4.55 OFW support, we have included many new features which are sure to excite users and demonstrate the power of the Cobra ODE.New features in 2.0 fw:On the fly generation of browser menu system (no pc app required)LED configurationFull 4k auto eject system addedXMB enabled passthrough system added, use of hardware switch not requiredConfiguration of eject delay addedAES performance increased by 100%Disc dumping via manager added+ Many other tweaks and performance benefits addedWe have also freshened up our user manauls to make installation and detailing of the full functionality of the Cobra ODE easier to understand.As you can see the 2.0 fw release is a massive leap forward. You can be sure to expect more from Team Cobra in the months to come.2.0fw for V5 QSV users will be released in the following week...Read "User Manual v2.0" and follow Bootloader update procedure prior to use FPGA update from MCU v2.0Thanks for your continued support.Cobra ODE BootLoader v1.3Cobra ODE MCU v2.0 * For PCB v3 / v4 / v4 QSV only *Cobra ODE Manager v1.6Cobra ODE Library v1.7Cobra ODE Bypass 455 v1.0Cobra ODE Database (28-02-2014)Anti-ODE Security Bypass Manual (English) v1.0Cobra ODE Installation Manual (2k5 to 4k) (v3/v4/v4-QSV) (English) v1.1Cobra ODE User Manual (English) v2.026 - 2 - 2014Cobra ODE News - InformationWe are now close to release of the 2.0 firmware for the V3, V4 and V4 QSV versions of Cobra. We expect to release the 2.0 firmware this weekend. The release includes support for 4.55 OFW on 4k consoles and all functionality previously announced for fw 2.0Furthermore, we are now shipping the 5.10B QSV Cobra which is more compact and runs on accelerated hardware giving faster performance. The Cobra 2.0 firmware will be released for 5.10B next week.All future firmware updates will be released in parallel on V3, V4 / V4 QSV and V5 / V5 QSV hardware.Photos of the new V5.10B hardware pack, will be published tomorrow.15 - 2 - 2014Cobra ODE News - InformationCobra 2.0 release imminent - features explained (Including initial support for 4.55):Cobra Team have been hard at work 24/7 preparing the next firmware release for our users. The incoming Cobra 2.0 is once again a massive update and packed with innovative new features.After the massive features (PS1, PS2, BD/DVD movies and IRD 9 support) added in the recent Cobra 1.90 update, we're back with yet more cool features in 2.0 which will be released in the coming week:2.0 will pack these features:Initial support for OFW 4.55 (Please read further information in news paragraph below)Auto-generate browser from the MCU, no more need for genps3extraDumping of original games using the BD drive is now possible through the Cobra ManagerAdded support for XMB enabled Pass-Through mode, meaning user no longer has to use slide switch to swap modes and in addition playback of burned PS1 discs when used in combination with the game.disc_type=ps1 configuration optionIncreased AES encryption module performance by over 100%, now there is no lag in playback of IRD generated ISO'sAdded support for updating PS3 firmware without needing to switch to PT modeEject now possible on 4k systems, without need for user to open console coverAdded support for "eject.delay" option to specify delay in milliseconds before reinsertion of disc after it has been ejected on QSB systems (default value of 1000ms)Added support for "leds.disable" configuration option to disable specific LED colorsWe have been working on a solution for OFW update 4.55, which will fix the added anti ODE measures. The current approach will be more streamlined than solutions currently offered by other teams, however it is not as convenient as using the ODE on pre 4.55 OFW's. Our R&D focus is now concentrating on other possible solutions to bypassing the 4.55 checks. The current working solution for OFW 4.55 will be released in the coming week. We advise users to use this update if they have accidentally updated to 4.55. Others who have not yet updated may want to consider keeping their consoles on 4.53 or lower until a better solution is available to benefit from the user convenience of the ODE on these firmwares.We can now also confirm that only 4k Super Slim series consoles are affected by the 4.55 update.Those who have 3k / 2k5 Slim or earlier consoles are safe to update to 4.55Cobra MCU 2.0 Changelog:- Added support for manager.type=browser configuration option-> Auto-generate browser from the MCU, no more need for genps3extra- Fix DISC.ISO dumping corruption-> Dumping of original games using the BD drive is now possible through the Cobra Manager- Added support for XMB enabled Pass-Through mode-> Allow access to the boot disc from the manager or browser and enable PT without touching the PT/EMU switch-> Allow playback of burned PS1 discs when used in combination with the game.disc_type=ps1 configuration option- Added support for game.pt=1 configuration option to force software-emulation Pass-Through- Increase AES encryption module performance by over 100%-> Playback of IRD generated ISO will not lag anymore- Added support for updating PS3 firmware without needing to switch to PT mode-> Still not recommended to update to 4.55 for super slim users- Added support for eject.add_menu=1 configuration option to add a menu to return to manager when game iso is loaded-> useful for 4k which don't have Remove Disc option in XMB- Added support for "eject.delay" option to specify delay in milliseconds before reinsertion of disc after it has been ejected on QSB systems (default value of 1000ms)- Added support for "mcu.underclock" configuration option-> Allows underclocking the MCU to further limit power consumption- Added support for "leds.disable" configuration option to disable specific LED colors-> Feature requested by forum user DarkKitarist because LED light was brightening up his room at night-> 1=blue, 2=red, 4=green, can be added to disable more than one color, leds.disable=6 disables red and green, leds.disable=7 disables all led colors-> Disabling a color can affect LED color in combined situations, for example, disabling green will show a purple color if you select a DVD or BD movie (normally white)- Fix freezing on 4.20 and 4.30 boardshttp://www.cobra-ode.com/ Lien vers le commentaire Partager sur d'autres sites More sharing options...
deaphroat Posté(e) 1 mars 2014 Share Posté(e) 1 mars 2014 Article obsolète, merci de continuer la discussion ici : Cobra Odde Firmware 2.0 Lien vers le commentaire Partager sur d'autres sites More sharing options...
Messages recommandés