[ Release ] Le Lizard Comme Port Com


Newserator
 Share

Messages recommandés

La team Maximus nous annonce une nouvelle option pour son Lizard disponible dès ce week-end.

Le Lizard pourra faire office d’écran en le branchant au port Com de la console pour récupérer facilement ses précieuses clés.

Plus d'informations ce week-end et surement accompagné d'une mise à jour de la bête.

lizard_comport.jpg

[ RELEASE ]

Avec un peu d'avance, la team nous fourni un diagramme pour les fils à souder et le firmware Gecko 1.32 pour son Lizard.

La team recommande de ne pas souder sur les pins mais d'utiliser un câble comme par exemple celui du Stringer.

ComWiring01.png

ComWiring02.png

ComWiring04.png

Dans le menu du Lizard vous verrez deux icônes : Xell Monitor et COM Passthru

Xell Monitor : Toutes les sorties du Xell seront reçus et les informations importantes comme l'Ip et la clé CPU seront affichés sur l'écran. Au même moment, le log est envoyé à l'USB de façon à ce que des logiciels comme J-Runner ou Teraterm ou autoGG peuvent les recevoire.

Aucune application n'est nécessaire pour l'affichage sur l'écran, une fois le Xell lancé et les informations affichées à l'écran, le Lizard arrête d'écouter le port.

COM Passthru : Les informations sont capturées et passés à l'USB sans s'afficher à l'écran. Dans ce mode, une des applications citée plus haut doit être utilisée. Dans ce mode le Lizard arrête d'écouter quand le bouton OK est appuyé.

Pour utiliser Teraterm, il faut ouvrir le port COM à 115200,8,N1. Les deux autres sont réglés par défaut sur ce mode.

Installer le driver du Lizard (FTDI VCP) pour que le port COM soit détecté par l'ordinateur.

Si dans le log USB, un message du type "ana enable" ou "ana disable" apparait, il faut essayer un autre fichier Xell.

download.gif Lizard Firmware Updater

homesite.gif Site officiel : 360nandflasher

Lien vers article original : http://x360.gx-mod.com/modules/news/article.php?storyid=4127

Lien vers le commentaire
Partager sur d'autres sites

+1, la MAJ est atomatique depuis la version 1.20 si ma mémoire est bonne !!

Toutefois, je me demande si team Maximus avait laché le sujet du Liteon 5S de la slim !! étrange !

Lien vers le commentaire
Partager sur d'autres sites

  • 2 weeks later...

Gecko 1.33 with LTU Board MTK / Write

Today we have released Gecko 1.33b

Added: DG16D5S Menu , currently there is only 2 functions enabled - MTK Mode for LTU 1175+ PCB and other to allow Write the Firmware to LTU 1175+ PCB . Please read the following to avoid false expectations:

a) There is no way to enter MTK on a stock drive (yet...)

B) There is no way to Read or Write the FIRMWARE OR DVD KEY from a stock drive.

c) There is no way to fully write a stock drive (yet...)

So in the meantime you need a DVD drive with a BLANK MT1332E chip like the Team Xecuter 1175+ LTU Board, it might also work if you get a blank chip and replace the stock IC (we have tried and seems to work), please be aware that could be IC chips that are sold as BLANK and actually are just pulled out from stock boards so be smart when purchasing MT1332E IC from sellers, make your tests first.

The procedure to write the new LTU Board with Lizard is as follows:

a) Get your key.bin and c-r.bin files with RGH using Jrunner (286) or newer

B) Using Jungleflasher ; generate the LTU firmware (** read JF guide as key.bin and c-r.bin MUST be combined with LTU file) (we are working to implement this feature inside Lizard toolbox)

c) Enter on the new menu on Lizard "DG16D5S->MTK" (0800 DL disc might need be inserted before if drive is not Blank).

d) Enter the new menu on Lizard "DG16D5S->Write" and from Lizard toolbox send the File generated on step "b".

Lien vers le commentaire
Partager sur d'autres sites

Invité
This topic is now closed to further replies.
 Share