Firmware LiteOn iXtreme avant Noël


Newserator
 Share

Messages recommandés

Bonsoir, j'aimerais savoir si quelqu'un a des nouvelles du flashage du lecteur liteon sur xbox360 car il est prévu normalement pour le 24 décembre mais personne n'en parle depuis...Merci d'avance

Ben, si c'est prévu le 24, c'est un peu normal que personne n'en parle !!! :0

Lien vers le commentaire
Partager sur d'autres sites

  • Réponses 227
  • Created
  • Dernière réponse

Top Posters In This Topic

Hello,

Avec impatience je l'attends ce firmware...

Concernant les methode à 1€ bien sur que cela marche impec. mais faut prevoir un 2eme euro pour l'ecriture...L'avantage du CK c'est qu'il posede plusieurs petit truc qui sont pas negligeable connecteur sata,alim,switch,...

++

Lien vers le commentaire
Partager sur d'autres sites

Dehors les pauvres! :0

t'a pas honte gros bourge de dire sa la roue tourne mon amie!!!!! :angry:

Slt,

Encore un qui n'a pas d'humour....

slt

c'était à prendre au 3e degré mais apparament certains s'arrete qu'au premier !!

c'est dommage et cela représente bien la connerie ambiante qu'on rencontre de nos jours!!

++

Lien vers le commentaire
Partager sur d'autres sites

je suis nouveau dans la scène xbox 360 et je connais pas mal de chose apres beaucoup de recherche sur le net (je ne suis pas un pro pour autant) alors si quelqu'un serait assez sympa pour m'expliquer ce qu'est le firmware 1.5 Ixtreme sa serait tres sympa...

Slt,

Cherche sur le site bon sang....y'en a pleins des tutos pour savoir tout ce que tu dois savoir sur ta XBOX.....

Lien vers le commentaire
Partager sur d'autres sites

je suis nouveau dans la scène xbox 360 et je connais pas mal de chose apres beaucoup de recherche sur le net (je ne suis pas un pro pour autant) alors si quelqu'un serait assez sympa pour m'expliquer ce qu'est le firmware 1.5 Ixtreme sa serait tres sympa...

Slt,

Cherche sur le site bon sang....y'en a pleins des tutos pour savoir tout ce que tu dois savoir sur ta XBOX.....

Ouè je vais chercher parce que on dirait que j'ai tué quelqu'un en demandant ça...pfff

Lien vers le commentaire
Partager sur d'autres sites

Ouè je vais chercher parce que on dirait que j'ai tué quelqu'un en demandant ça...pfff

Ok parce qu'en plus t'avais pas cherché...

Nan t'a tué personne on le sait bien...mais ca deviens franchement agaceant de répéter les memes choses sans arrets toute la journée..

Modifié par pa2panic
Lien vers le commentaire
Partager sur d'autres sites

bonjour,

voila je n'est pas lut les 10 pages concernant le firmware du lite-on qui doit sortir avant noël mais je reste septique sur la chose car :

ont ma toujours affirmer jusqu'à aujourd'hui qu'il était impossible et ce pour toujours d'écrire sur un lite-on. donc pourquoi pour noël 2008 sa sera possible d'injecter un firmware ?

désolé si la réponse est dans les autres pages mais je reste quand même sur le cu* si bizarrement ils arrivent a y injecter un firmware.

EDIT:

autant pour moi je vien de lire le dernier lien de toys3d appariement il n'a jamais était impossible d'écrire sur un lite-on mais juste que les données étaient crypter ;)

@++

Modifié par spiderman
Lien vers le commentaire
Partager sur d'autres sites

bonjour ,

oui le firmware est sortit cette nuit, mais encore tres dur a trouver ^^

de plus y'a la possibilité de flasher sous windows avec Jungleflasher GUI

tout marche nickel avec le lite on :)

j'ai chopé la clé avec le 360Xtractor ( ca tout le monde le fait ^^ )

puis j'ai flashé sous Windows en suivant ce tuto : http://dwl.xbox-scene.com/iriez/lite-on.do...32.tutorial.pdf

voila voila

joyeux noel a tous

PS : si vous avez du mal a trouver le IXtreme 1.5 LiteOn - Samsung - BenQ - TEAM JUNGLE

c'est normal, un peu de patience ^^

Lien vers le commentaire
Partager sur d'autres sites

bonjour ,

oui le firmware est sortit cette nuit, mais encore tres dur a trouver ^^

de plus y'a la possibilité de flasher sous windows avec Jungleflasher GUI

tout marche nickel avec le lite on :)

j'ai chopé la clé avec le 360Xtractor ( ca tout le monde le fait ^^ )

puis j'ai flashé sous Windows en suivant ce tuto : http://dwl.xbox-scene.com/iriez/lite-on.do...32.tutorial.pdf

voila voila

joyeux noel a tous

PS : si vous avez du mal a trouver le IXtreme 1.5 LiteOn - Samsung - BenQ - TEAM JUNGLE

c'est normal, un peu de patience ^^

Salut Games tu as flashé ton lecteur liteon deja ?? si oui, chapeau !

Lien vers le commentaire
Partager sur d'autres sites

TEAM JUNGLE Presents IXtreme 1.5 firmware

-----------------------------------------

World first IXtreme fw for the unhackable Liteon drive!

Also for Benq and Samsung drives!

This has been a huge effort by everyone in Team Jungle comprising of the best talent in the world. It has been a privilege to work in the team which has enabled us to get to this point. Truly a worldwide effort and the greatest hack that i have been involved in!

The road has been a long one:

- getting the key serial output

- decapping the 1319L chip

- reading the embedded flash, very difficult!

- decrypting fw

- creating iXtreme

- creating Jungleflasher GUI+tools

Greatest teamwork eva!

Features

--------

Support for Liteon DG-16D2S unhackable drive

Flash from Windows with new Jungleflasher GUI

Smart Inquiry cdb for enhanced spoofing - Liteon

Enhanced c/r timing - all drives

Enhanced disc jitter - all drives

Enhanced spoofing support for Liteon - Samsung and Benq

Enhanced bad angle support - all drives

Secret Liteon MS Inquiry cdb support - Samsung and Benq

Half Open tray on powerup for Windows inquiry/flash mode - all drives

Disc lock/unlock cdb - Liteon Windows mode

Drive key+serial info cdb - Liteon Windows mode

More secure firmguard - Benq[/i]

Hitachi 1.5 is set to be released shortly. Hold onto your pants Hitachi owners! =)

There is ALOT of new information to digest, in regards to this entire project, and the utilization of the LiteOn IXtreme firmware. With this release, also includes a new FirmTool (version 1.3), a beta version of JungleFlasher, which is a new GUI based all-in-one flash that includes a firmware tool, DVDKEY32, MTK flashing and Hitachi support. Please note that this software IS BETA and will not function 100%. Yes, there will be plenty of bugs :) JungleFlasher logs all errors/actions and will ask you to save a log upon exit. If you have a error please help us improve the software by emailing the log file to JungleFlasher - at - gmail - com. At this moment, we have had quirky issues in regards to VIA chipsets and flashing/reading/erasing the LiteOn drive. Please pay attention to the 2nd prompt in particular after hitting the Lite-On-Erase button. Power cycling the drive at the correct time is very important for VIA users. If the VIA polls the drive after erase, it WILL freeze/lock your computer. Tools for DOS erase/flash/key/spoof are included in this release for any users having difficulties within windows.

JungleFlasher REQUIREMENTS:

-PortIO32.exe - you MUST run this exe to install PortIO onto your system! (included in release)

-.NET 2.0 or above

Please note that at this time, IXtreme 1.5 still requires the utilization of a RS232 to TTL serial hardware, or a popular variant such as CK3 with Probe or Maximus Xtractor. This is necessary to extract the key/inquiry/identify .bin files. These files are neccessary for spoofing & gathering your key, even if you are just flashing the 1.5 IXtreme to a LiteOn drive. They contain serial information that is required for proper identification and security related issues. Note that spoofing to previous versions of IXtreme are NOT stealth, and is not supported.

If you have a CK3 please refer to this tutorial for dvdkey extraction:

[a href=http://team-xecuter.com/ck3/liteon_windows.htm]here[/a]

If you have a Maximus Xtractor please refer to this tutorial for dvdkey extraction:

[a href=http://www.maximusgames.net/360xtractor.php]here[/a]

We have compiled a tutorial on flashing the Liteon drive prior to the release of JungleFlasher. Tutorial is located here:[a href=http://dwl.xbox-scene.com/iriez/lite-on.dosflash32.tutorial.pdf]here[/a]

Instructions on flashing a LiteOn with JungleFlasher are as follows:

1: Hookup LiteON to sata port and power drive

2: In JungleFlasher select MTK Flash 32 Tab.

3: Select correct port (see above tutorials for figuring out the correct port)

4: Hit Lite-On-Erase button. NOTE - This is done AFTER you have already successfully transferred your inquiry.bin / identify.bin / key.bin files!!! Please read the Prompts VERY carefully! It is important to power cycle the drive at the correct moment to prevent your computer from freezing with VIA cards.

5: After power cycle, drive should return status 0x72 and display Flash information. If it does not, click Device ID and power cycle as prompted. If still not successful then you did not successfully erase the drive.

6: Once Flash information is displayed, you are ready to write! Go to firmware tool 32 tab and select "Load from dump files" and select your key/inquiry/identify .bin files. Then select ix15-liteon.bin after pressing "Open Target Firmware". Press "Spoof Source To Target". Then "Save to File" and save your CFW.bin.

7: Go back to MTK Flash 32 tab and select Write. It should automatically take the liteon firmware you loaded in the Firmware 32 tab and flash to the drive. It will automatically verify flash. If verified your done :)

If write verification fails, then there is likely a issue with JungleFlasher and your sata chipset. Please use DosFlash to flash the drive with the CFW.bin with the correct spoofed information. If the drive is successfully erased, dosflash will see the flash information and will be capable of writing!

DOS Instructions:

You will need to have your key.bin/inquiry.bin/identify.bin handy using the windows applications! If this is the case, please use firmtool 1.3 or JungleFlasher to prepare your ix15-liteon.bin with the correct dvdkey and spoofed serial information(inquiry/identify). At this moment, DOS based dvdkey/inquiry/identify extraction is not fully supported by TEAM JUNGLE. There is DOS based instructions for the CK3 by xecuter in the tutorial above.

1: Run L-O-Eras.EXE with the correct port specified (see tutorial above for Lite-On-Erase.exe information)

2: Run DosFlash.exe

3: Select correct number that represents your sata port / LiteOn drive. Note that the drive has to be successfully erased in order for DosFlash to see the drive!

4: Select write, and choose your liteon firmare .bin that you have prepared with your dvdkey / correctly spoofed identify / inquiry data!

5: Write, plug in drive and play xbox :)

A new DosFlash will be released very shortly that will include LiteOn DVDKey extraction and dummy.bin capabilities. Note that firmtool uses dummy.bin to correctly spoof information from dumped key/inquiry/identify into other 1.5 firmwares. At this moment JungleFlasher and DVDKey32 support the dummy.bin feature!

Source Xbins

Lien vers le commentaire
Partager sur d'autres sites

Créer un compte ou se connecter pour commenter

Vous devez être membre afin de pouvoir déposer un commentaire

Créer un compte

Créez un compte sur notre communauté. C’est facile !

Créer un nouveau compte

Se connecter

Vous avez déjà un compte ? Connectez-vous ici.

Connectez-vous maintenant
 Share

Annonces