jaxx211

Personne d'autre n'a de soucis pour se connecter a un routeur wifi?

C'est exactement pour ça que je lui posait la question J'avais déja fait le test mais dans le doute j'ai retenté. Le message d'erreur est le meme. J'ai meme essayé en enlevant tout cryptage... meme résultat. Elle trouve bien mon réseau, mais pas moyen d'y acceder. Je ne comprends pourquoi. Le mesage est le suivant : "Une erreur de connexion est survenue. Impossible d'établir une connexion avec le point d'acces. Vérifier les paramètres de sécurité du réseau et réessayer."

oui, ca aussi...

Bonjour a tous, je vous ecris apres avoir fait tous les réglages possibles. J'ai un routeur linksys et mon pc sous linux connecté en wifi dessus. Tout marche tres bien. J'ai voulu connecter ma psp a ce meme routeur et la c'est plus difficile qu'il n'y parait. Je crée une nouvelle connexion mode infrastructure, scan mon reseau (il trouve mon ssid), je met la clé wpa-tkip du réseau, j'indique ip auto (je suis en dhcp), DNS primaire : dns le neuf 80.118.192.100 DNS secondaire : dns le neuf 80.118.196.36 (est ce les bons dns?!) Proxy : non Navigateur : oui Et la console me dit qu'il y a probleme de communication et n'arrive pas a établir la connexion. J'ai tenté de modifier les parametres du routeur : mettre wep, ajouer les adresses MAC des appareils, IP fixe en désactivant le dhcp, etc. Niveau psp, mettre les reglages faciles... Rien n'y fait, j'ai toujours le meme message m'indiquant que ca ne marche pas..... Pourtant, ca a marché une fois. j'ai réussi a acceder a google (5minutes pour voir) avec... C'est apres, en ayant redemmaré la psp que rien ne va plus. Elle a firmware 2.71 d'origine, j'ai rétablit les parametres par défaut mais toujours rien. Avez vous une explication??? Ou mieux encore, la réponse a mon probleme? Merci d'avance parce que je ne comprend vraiment pas pourquoi elle refuse d'acceder a internet!

J'ai essayé de me connecter a mon compte gmail mais ca bloque. As tu la solution? (erreur de connection au serveur)

salut! je connais pas xig2 mais pour tes gravure, k3b (avec cdrecord a jour) devrait faire l'affaire. c'est l'équivalent de nero en quelque sorte. En meme temps, j'ai jamais gravé de backup xbox alors si quelqu'un peut confirmer...

Et bien, je te remercie beaucoup pour tes judicieux conseils... ca marche enfin!!! J'ai bien suivi ce que tu as mis dans ce dernier post par rapport au nom du partage et bien vérifié que l'ip etait bien la bonne et .... j''accede a tous mes fichiers partagés! MERCI A TOI !!!!! Par contre je ne suis pas sur que chmod777 est obligatoire car je ne l'ai fait que sur un dossier et les autres sont accessibles aussi. encore merci, ca faisait un moment que je cherchais la solution!

En esperant t'avoir aidé ! @+ Merci pour ton message. Dans l'extrait de ton xboxmediacenter.xml l'adresse IP c'est celle de ton routeur ou de ton PC? J'ai essayé avec ton smb.conf mais ca plante mon partage samba. J'ai essayé de l'adapter en suivant les conseils sur le site que tu as mis en lien mais xbmc ne veut toujours pas afficher mes fichiers pc.... Voici mon smb.conf : # This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options (perhaps too # many!) most of which are not shown in this example # # Any line which starts with a ; (semi-colon) or a # (hash) # is a comment and is ignored. In this example we will use a # # for commentry and a ; for parts of the config file that you # may wish to enable # # NOTE: Whenever you modify this file you should run the command "testparm" # to check that you have not made any basic syntactic errors. # #======================= Global Settings ===================================== [global] # 1. Server Naming Options: # workgroup = NT-Domain-Name or Workgroup-Name workgroup = WORKGROUP public = yes # netbios name is the name you will see in "Network Neighbourhood", # but defaults to your hostname # netbios name = <name_of_this_server> # server string is the equivalent of the NT Description field server string = Samba Server %v # Message command is run by samba when a "popup" message is sent to it. # The example below is for use with LinPopUp: ; message command = /usr/bin/linpopup "%f" "%m" %s; rm %s # 2. Printing Options: # CHANGES TO ENABLE PRINTING ON ALL CUPS PRINTERS IN THE NETWORK # (as cups is now used in linux-mandrake 7.2 by default) # if you want to automatically load your printer list rather # than setting them up individually then you'll need this printcap name = cups # printcap cache time, so samba will automatically load new cups printers printcap cache time = 60 # It should not be necessary to spell out the print system type unless # yours is non-standard. Currently supported print systems include: # bsd, sysv, plp, lprng, aix, hpux, qnx, cups printing = cups # Samba 2.2 supports the Windows NT-style point-and-print feature. To # use this, you need to be able to upload print drivers to the samba # server. The printer admins (or root) may install drivers onto samba. # Note that this feature uses the print$ share, so you will need to # enable it below. # Printer admins are now defined by granting the SePrintOperatorPrivilege, ie: # run: net rpc rights grant 'DOMAIN\Printer Operators' SePrintOperatorPrivilege # 3. Logging Options: # this tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/%m.log # Put a capping on the size of the log files (in Kb). max log size = 50 # Set the log (verbosity) level (0 <= log level <= 10) # log level = 3 # 4. Security and Domain Membership Options: # This option is important for security. It allows you to restrict # connections to machines which are on your local network. The # following example restricts access to two C class networks and # the "loopback" interface. For more examples of the syntax see # the smb.conf man page. Do not enable this if (tcp/ip) name resolution does # not work for all the hosts in your network. # hosts allow = 192.168.1. 192.168.2. 127. # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" is used # guest account = pcguest # Allow users to map to guest: map to guest = bad user # Security mode. Most people will want user level security. See # security_level.txt for details. security = user # Use password server option only with security = server or security = domain # When using security = domain, you should use password server = * # password server = <NT-Server-Name> # password server = * # Password Level allows matching of _n_ characters of the password for # all combinations of upper and lower case. # password level = 8 # username level = 8 # You may wish to use password encryption. Please read # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation. # Do not enable this option unless you have read those documents # Encrypted passwords are required for any use of samba in a Windows NT domain # The smbpasswd file is only required by a server doing authentication, thus # members of a domain do not need one. encrypt passwords = yes # The following are needed to allow password changing from Windows to # also update the Linux system password. # NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above. # NOTE2: You do NOT need these to allow workstations to change only # the encrypted SMB passwords. They allow the Unix password # to be kept in sync with the SMB password. ; unix password sync = Yes # You either need to setup a passwd program and passwd chat, or # enable pam password change ; pam password change = yes # passwd program = /usr/bin/passwd '%u' ; passwd chat = *New*UNIX*password* %n\n *Re*ype*new*UNIX*password* %n\n ;*passwd:*all*authentication*tokens*updated*successfully* # Unix users can map to different SMB User names ; username map = /etc/samba/smbusers # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting # include = /etc/samba/smb.conf.%m # Options for using winbind. Winbind allows you to do all account and # authentication from a Windows or samba domain controller, creating # accounts on the fly, and maintaining a mapping of Windows RIDs to unix uid's # and gid's. winbind uid and winbind gid are the only required parameters. # # winbind uid is the range of uid's winbind can use when mapping RIDs to uid's # idmap uid = 10000-20000 # # winbind gid is the range of uid's winbind can use when mapping RIDs to gid's # idmap gid = 10000-20000 # # winbind separator is the character a user must use between their domain # name and username, defaults to "\" # winbind separator = + # # winbind use default domain allows you to have winbind return usernames # in the form user instead of DOMAIN+user for the domain listed in the # workgroup parameter. # winbind use default domain = yes # # template homedir determines the home directory for winbind users, with # %D expanding to their domain name and %U expanding to their username: # template homedir = /home/%D/%U # When using winbind, you may want to have samba create home directories # on the fly for authenticated users. Ensure that /etc/pam.d/samba is # using 'service=system-auth-winbind' in pam_stack modules, and then # enable obedience of pam restrictions below: # obey pam restrictions = yes # # template shell determines the shell users authenticated by winbind get # template shell = /bin/bash # 5. Browser Control and Networking Options: # Most people will find that this option gives better performance. # See speed.txt and the manual pages for details socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 # Configure Samba to use multiple interfaces # If you have multiple network interfaces then you must list them # here. See the man page for details. # interfaces = 192.168.12.2/24 192.168.13.2/24 # Configure remote browse list synchronisation here # request announcement to, or browse list sync from: # a specific host or from / to a whole subnet (see below) # remote browse sync = 192.168.3.25 192.168.5.255 # Cause this host to announce itself to local subnets here # remote announce = 192.168.1.255 192.168.2.44 # set local master to no if you don't want Samba to become a master # browser on your network. Otherwise the normal election rules apply # local master = no # OS Level determines the precedence of this server in master browser # elections. The default value should be reasonable # os level = 33 # Domain Master specifies Samba to be the Domain Master Browser. This # allows Samba to collate browse lists between subnets. Don't use this # if you already have a Windows NT domain controller doing this job # domain master = yes # Preferred Master causes Samba to force a local browser election on startup # and gives it a slightly higher chance of winning the election # preferred master = yes # 6. Domain Control Options: # Enable this if you want Samba to be a domain logon server for # Windows95 workstations or Primary Domain Controller for WinNT and Win2k # domain logons = yes # if you enable domain logons then you may want a per-machine or # per user logon script # run a specific logon batch file per workstation (machine) # logon script = %m.bat # run a specific logon batch file per username # logon script = %u.bat # Where to store roaming profiles for WinNT and Win2k # %L substitutes for this servers netbios name, %u is username # You must uncomment the [Profiles] share below # logon path = \\%L\Profiles\%u # Where to store roaming profiles for Win9x. Be careful with this as it also # impacts where Win2k finds it's /HOME share # logon home = \\%L\%u\.profile # The add user script is used by a domain member to add local user accounts # that have been authenticated by the domain controller, or when adding # users via the Windows NT Tools (ie User Manager for Domains). # Scripts for file (passwd, smbpasswd) backend: # add user script = /usr/sbin/useradd -s /bin/false '%u' # delete user script = /usr/sbin/userdel '%s' # add user to group script = /usr/bin/gpasswd -a '%u' '%g' # delete user from group script = /usr/bin/gpasswd -d '%u' '%g' # set primary group script = /usr/sbin/usermod -g '%g' '%u' # add group script = /usr/sbin/groupadd %g && getent group '%g'|awk -F: '{print $3}' # delete group script = /usr/sbin/groupdel '%g' # Scripts for LDAP backend (assumes nss_ldap is in use on the domain controller, # and needs configuration in smbldap_conf.pm # add user script = /usr/sbin/smbldap-useradd -m '%u' # delete user script = /usr/sbin/smbldap-userdel '%u' # add user to group script = /usr/sbin/smbldap-groupmod -m '%u' '%g' # delete user from group script = /usr/sbin/smbldap-groupmod -x '%u' '%g' # set primary group script = /usr/sbin/smbldap-usermod -g '%g' '%u' # add group script = /usr/sbin/smbldap-groupadd '%g' && /usr/sbin/smbldap-groupshow %g|awk '/^gidNumber:/ {print $2}' # delete group script = /usr/sbin/smbldap-groupdel '%g' # The add machine script is use by a samba server configured as a domain # controller to add local machine accounts when adding machines to the domain. # The script must work from the command line when replacing the macros, # or the operation will fail. Check that groups exist if forcing a group. # Script for domain controller for adding machines: # add machine script = /usr/sbin/useradd -d /dev/null -g machines -c 'Machine Account' -s /bin/false -M '%u' # Script for domain controller with LDAP backend for adding machines (please # configure in /etc/samba/smbldap_conf.pm first): # add machine script = /usr/sbin/smbldap-useradd -w -d /dev/null -c 'Machine Account' -s /bin/false '%u' # Domain groups: # Domain groups are now configured by using the 'net groupmap' tool # Enable priveleges, ie allowing members of Domain Admins to join machines # to the domain # enable privileges = yes # Samba Password Database configuration: # Samba now has runtime-configurable password database backends. Multiple # passdb backends may be used, but users will only be added to the first one # Default: # passdb backend = smbpasswd guest # TDB backen with fallback to smbpasswd and guest # passdb backend = tdbsam smbpasswd guest # LDAP with fallback to smbpasswd guest # Enable SSL by using an ldaps url, or enable tls with 'ldap ssl' below. # passdb backend = ldapsam:ldaps://ldap.mydomain.com smbpasswd guest # Use the samba2 LDAP schema: # passdb backend = ldapsam_compat:ldaps://ldap.mydomain.com smbpasswd guest # Idmap settings (set idmap uid and idmap gid above): # Idmap backend to use: # idmap backend = ldap:ldap://ldap.mydomain.com # LDAP configuration for Domain Controlling: # The account (dn) that samba uses to access the LDAP server # This account needs to have write access to the LDAP tree # You will need to give samba the password for this dn, by # running 'smbpasswd -w mypassword' # ldap admin dn = cn=root,dc=mydomain,dc=com # ldap ssl = start_tls # start_tls should run on 389, but samba defaults incorrectly to 636 # ldap port = 389 # ldap suffix = dc=mydomain,dc=com # Seperate suffixes are available for machines, users, groups, and idmap, if # ldap suffix appears first, it is appended to the specific suffix. # Example for a unix-ish directory layout: # ldap machine suffix = ou=Hosts # ldap user suffix = ou=People # ldap group suffix = ou=Group # ldap idmap suffix = ou=Idmap # Example for AD-ish layout: # ldap machine suffix = cn=Computers # ldap user suffix = cn=Users # ldap group suffix = cn=Groups # ldap idmap suffix = cn=Idmap # 7. Name Resolution Options: # All NetBIOS names must be resolved to IP Addresses # 'Name Resolve Order' allows the named resolution mechanism to be specified # the default order is "host lmhosts wins bcast". "host" means use the unix # system gethostbyname() function call that will use either /etc/hosts OR # DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf # and the /etc/resolv.conf file. "host" therefore is system configuration # dependant. This parameter is most often of use to prevent DNS lookups # in order to resolve NetBIOS names to IP Addresses. Use with care! # The example below excludes use of name resolution for machines that are NOT # on the local network segment # - OR - are not deliberately to be known via lmhosts or via WINS. # name resolve order = wins lmhosts bcast # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server # wins support = yes # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both # wins server = w.x.y.z # WINS Proxy - Tells Samba to answer name resolution queries on # behalf of a non WINS capable client, for this to work there must be # at least one WINS Server on the network. The default is NO. # wins proxy = yes # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names # via DNS nslookups. The built-in default for versions 1.9.17 is yes, # this has been changed in version 1.9.18 to no. dns proxy = no # 8. File Naming Options: # Case Preservation can be handy - system default is _no_ # NOTE: These can be set on a per share basis # preserve case = no # short preserve case = no # Default case is normally upper case for all DOS files # default case = lower # Be very careful with case sensitivity - it can break things! # case sensitive = no # Enabling internationalization: # you can match a Windows code page with a UNIX character set. # Windows: 437 (US), 737 (GREEK), 850 (Latin1 - Western European), # 852 (Eastern Eu.), 861 (Icelandic), 932 (Cyrillic - Russian), # 936 (Japanese - Shift-JIS), 936 (Simpl. ), 949 (Korean Hangul), # 950 (Trad. Chin.). # UNIX: ISO8859-1 (Western European), ISO8859-2 (Eastern Eu.), # ISO8859-5 (Russian Cyrillic), KOI8-R (Alt-Russ. Cyril.) # This is an example for french users: # dos charset = 850 # unix charset = ISO8859-1 #============================ Share Definitions ============================== [homes] comment = Home Directories browseable = no read only = no [WIN_D] path = /mnt/win_d guest ok = yes case sensitive = no msdfs proxy = no [HDB] path = /mnt/hdb [HEINRICHMUSQ] path = /home/heinrich/Musique comment = /home/heinrich/Musique public = yes guest ok = yes writable = no wide links = no Si tu vois ce qui cloche...

Merci de l'info... Je vais voir ca de plus pres...

salut, je ne suis pas un specialiste linux maisl il me semble que dans le fichier /etc/smb.conf tu devrais pouvoir trouver le nom ton réseau sous linux !!!!! n'oublie pas de redémarrer le serveur samba après coup si modification voilou ps : sinon pour vérifier la config utilise un autre pc avec windows. autres solution passe en direct par les adresses ip de ta machine dans xboxmediacenter.xml <video> <default></default> <bookmark> <name>F2 DivxEnfants</name> <path>smb://192.168.1.2/divx/DivxEnfants</path> </bookmark> </video> cela devrait marcher de moment que tu ping ta xboite sous linux Ok, j'ai bien trouvé le nom de mo, reseau dans /etc/smb.conf J'ai modifié pour mettre workgroup et j'ai redemmarer le reseau samba. C'est ok. Mais la console ne se connecte pas malgré tout. Les ip entrées dedans sont bonnes puisques sous windows (avec le meme pc) ca marche sans rien faire.... Ca ne pourrait pas venir des mots de passe utilisateur? Quoique pour winxp wbmc ne m'a rien demandé et je pouvais lire les dossiers que j'ai partagé. Par contre j'accede sans probleme par FTP a ma console, et en wifi en plus.. Pas de soucis pour faire ca... Merci de ton aide salut, j'ai oublié de te dire qu'il doit il y avoir certains parametres a ajouter a ton share son linux afin que tout le monde puisse y acceder !!!! cela se met dans le fichier /etc/smb.conf aussi. le share doit etre du type public !!!! a accessible en lecteur a tous (suivant la sécurité de ton reseau). je ne me rappel plus les parametres a ajouter !!!! mais je pense que si tu passes par l'interface gui de Mandriva pour configurer samba tu devrais voir les parametres dont je te parle sinon google est ton amis. je suis désolé de ne pouvoir d'aider plus mais je te confirme que tu es sur la bonne voie Merci a toi, quand j'aurais trouvé la solution (que je cherche depuis quelques temps déja) je metterais un message sur le forum... Mais si tu as des infos complémentaires, je suis preneur!

salut, je ne suis pas un specialiste linux maisl il me semble que dans le fichier /etc/smb.conf tu devrais pouvoir trouver le nom ton réseau sous linux !!!!! n'oublie pas de redémarrer le serveur samba après coup si modification voilou ps : sinon pour vérifier la config utilise un autre pc avec windows. autres solution passe en direct par les adresses ip de ta machine dans xboxmediacenter.xml <video> <default></default> <bookmark> <name>F2 DivxEnfants</name> <path>smb://192.168.1.2/divx/DivxEnfants</path> </bookmark> </video> cela devrait marcher de moment que tu ping ta xboite sous linux Ok, j'ai bien trouvé le nom de mo, reseau dans /etc/smb.conf J'ai modifié pour mettre workgroup et j'ai redemmarer le reseau samba. C'est ok. Mais la console ne se connecte pas malgré tout. Les ip entrées dedans sont bonnes puisques sous windows (avec le meme pc) ca marche sans rien faire.... Ca ne pourrait pas venir des mots de passe utilisateur? Quoique pour winxp wbmc ne m'a rien demandé et je pouvais lire les dossiers que j'ai partagé. Par contre j'accede sans probleme par FTP a ma console, et en wifi en plus.. Pas de soucis pour faire ca... Merci de ton aide

Personne n'utilise Linux ici ???

bonjour a tous, en parcourant les pages du forum et en ayant essayé, je vois qu'a partir de l'xbox, accéder a son pc sous win xp est super simple. Mais j'utilise mandriva 2006 et je voudrais savoir si quelqu'un est dans le meme cas que moi?! Comment fait on pour configurer correstement son mandriva pour que l'xbox le repere? Le samba sur ma machine est bien activé et j'ai partagé les dossiers que je voulais. Le probleme vient peut etre du nom de mon reseau (workgroup sous win xp) mais je ne sais pas ou le trouver ni comment le changer si besoin... Merci de votre aide