Question Sur Les Nand X (V1, V2, V3).


Darkdjack
 Share

Messages recommandés

Salut à tous,

J'ai acheté un Nand-X il y a 2 ans maintenant... Il fonctionnait très bien et j'ai pu glitcher ma console. Ceci dit, lorsque j'ai eu besoin de poser des Coolrunner, je me suis aperçu que ma version n'était pas compatible avec les nouveaux outils en vigueur (nandpro 3.0).

Mon pote m'a donc dépanné un Nand X V3 qu'il a acheté il y a 1 an environ. Pas de soucis, j'ai pu continuer d'installer mes Coolrunner et je projetais aussi de faire mes installations de DGX avec. Sauf que, en voulant justement poser un DGX, je me sui rendu compte que je l'avais égaré (son nand X V3). Et j'ai les boules !!! lol

J'ai demandé a mes fournisseurs mais personne n'a de NandX V3, seule la V2 est dispo. J'ai tenté de chercher un tuto pour mettre à jour mon vieux nand X mais tout était en englais, j'avoue que je n'ai rien capté et cela m'a paru assez compiqué (ou mal expliqué). Mes questions sont donc les suivantes :

1/ Existe t-il une solution pour mettre à jour mon NandX compatible nandpro 3.0 (car celui là je l'ai toujours) ?

2/ Existe t-il une autre solution pour extraire ma Nand sans le Nand-X V3? un autre objet ?

3/ Au pire le V2 peut-il fonctionner ?

Merci pour vos informations,

Modifié par Darkdjack
Lien vers le commentaire
Partager sur d'autres sites

Nandpro 3 n'as jamais été obligatoire pour glitcher une console, la version 2 marche très bien.

Sinon si tu veux vraiment changer de matériel tu peux te tourner sur un jr programmer qui te permet de dump / write ta nand et programmer tes puces.

Lien vers le commentaire
Partager sur d'autres sites

salut,

il existe un cable usb speciale pour mettre a jour ton nand x en v3

sinon l'avantage du jr programmer est qu'il permet en plus de faire la fonction sonus ;)

Lien vers le commentaire
Partager sur d'autres sites

*The new J-R Programmer v2 now includes full POST monitoring for the CR3 Pro RATER feature. Speed enhancements are also included that puts it within 50 seconds of the high speed NAND-X

JRP_V2.jpg

NEW Version 2 with Full POST Monitoring and CR3 Pro RATER Support. Also includes speed enhancements (2-3 minutes faster than JRP v1 !)

The new TX J-R Programmer V2 has been created to cater to the budget conscious and coded to work hand in hand with the latest version of the J-Runner app.

A third of the size of the TX NAND-X and optimized to run faster than any other USB-SPI PIC based tool (Example Speeds: Others average 16M read 7m 20s, JRP v2 average 16M read 3mins), this nifty tool can fully read/write NAND over SPI, program CoolRunners or any Xilinx based RGH device over USB and also able to program onboard sounds using the TX SONUS 360 !

Complete with a CR JTAG cable so you simply plug 'n program without any soldering using the latest J-Runner App (needs to be at least Build 283). Also comes with NAND installation wires that have the connectors that are compatible with the NAND-X QSB boards. If you don't use the QSB's you can simply cut off the connectors and do a normal wires only install.

The J-R Programmer V2 is also fully upgradeable and can be programmed using the Xecuter X360USB PRO Update app. Onboard LED's indicate Power and BootLoader mode.

RED LED: Bootloader Mode (Switch to the left)
GREEN LED: J-R Programmer Mode (Switch to the right)
RED LED FLASHING: R/W Activity & POST Activity (Switch to the right)

Features:

  • Fast NAND Programming
  • Fast XILINX CR JTAG Programming
  • Compatible with all CoolRunners inc the new CR3 Pro
  • Supports Full Post Monitoring
  • Compatible with both Phat and Slim
  • Onboard LED's indicate Power & Data
  • Easy Install System
  • Compatible with All NAND-X QSB's
  • Includes Cable For QSB V3 Kit or Wires Install (QSB V3 Kits Sold Separately)
  • Includes Cable For Xilinx CRJTAG
  • Includes Cable for Xecuter Sonus 360 (Sonus 360 QSB Sold Separately – Trinity Kit or Corona Kit)
  • Includes KIOSK option for Remote On
  • Built-in Programmer For Future Firmware Upgrades
  • Designed for the latest J-Runner App (Build 283+)
  • Rock Solid Design – Tested by the J-Runner Team
  • Supports New QSB V3 Kits (Solder Separately)
  • Supports Sonus 360 Programming
  • Affordable – We Provide You With More For Less !
  • High Quality & Trusted TX Design
  • Available to buy separately only $24.95

Source et site officiel:

http://team-xecuter.com/

Lien vers le commentaire
Partager sur d'autres sites

Créer un compte ou se connecter pour commenter

Vous devez être membre afin de pouvoir déposer un commentaire

Créer un compte

Créez un compte sur notre communauté. C’est facile !

Créer un nouveau compte

Se connecter

Vous avez déjà un compte ? Connectez-vous ici.

Connectez-vous maintenant
 Share